SK 3485837 Wall-mounted Blue e+ Dynamic cooling unit 1.6 kW

Giá bán: Liên hệ

SK Blue e+ cooling unit, wall-mounted, 1.6 kW, 110–240 V, 1~, 380–480 V, 3~, 50–60 Hz, carbon steel, W x H x D: 400 x 950 x 310 mm

Tình trạng: Còn hàng

Bảo hành:

Địa chỉ

109 Đường N2, Khu dân cư Khang Điền, P. Long Trường, TP HCM, VN

HOTLINE

0917082400

Đặt mua ngay

Thông tin chi tiết
Thông tin bổ sung

CATEGORY	DETAILS
Total cooling output to DIN EN 14511	L35/L35: 1.6 kW (50/60 Hz) • L35/L50: 1.1 kW (50/60 Hz)
Cooling output (BTU/h)	L35/L35: 5,459 BTU/h (50/60 Hz) • L35/L50: 3,753 BTU/h (50/60 Hz)
Rated operating voltage	110–240 V, 1~, 50/60 Hz • 380–480 V, 3~, 50/60 Hz
Rated output	0.7 kW
Air throughput	External circuit: 895 m³/h • Internal circuit: 700 m³/h
Air throughput (CFM)	External circuit: 526.8 cfm • Internal circuit: 412 cfm
Energy efficiency ratio	EER (L35/L35): 2.96 (50/60 Hz)
Seasonal energy efficiency ratio	SEER: 5.4
Dimensions	400 × 950 × 310 mm
Dimensions (inch)	15.7 × 37.4 × 12.2 ˝
Required mounting cut-out	Width: 383 mm • Height: 929 mm
Mounting cut-out (inch)	Width: 15.1 ˝ • Height: 36.6 ˝
Protection category	Internal circuit: IP55
Refrigerant	R-1234yf / 0.77 kg
Refrigerant distribution	Compression system: 0.48 kg • Heat pipe system: 0.29 kg
Global warming potential	GWP: 0.5 • CO₂e: 0 t
Refrigerant (lb.)	Quantity: 1.7 lb
Temperature control	e+ controller (factory setting +35 °C)
Operating temp range	-20 °C to +60 °C
Operating temp range (°F)	-4 °F to +140 °F
Storage temp range	-40 °C to +70 °C
Storage temp range (°F)	-40 °F to +158 °F
Refrigerant circuit range	3 °C to 60 °C
Heat pipe range	-20 °C to 45 °C
Setting range	20 °C to 50 °C
Setting range (°F)	68 °F to 122 °F
Rated power consumption	L35/L35: 0.54 kW (50/60 Hz) • L35/L50: 0.61 kW (50/60 Hz)
Permissible operating pressure	Max. 24 bar (348.1 PSI)
Packaging unit	1 pc
Weight	Net: 40 kg • Gross: 46 kg
Material	Carbon steel
Construction note	Partial installation not possible
Notes	To comply with DNV-CG-0339 EMC requirements, additional coil SK 3124.010 must be installed on each phase. Coil operation only possible with 220–240 V 1~ and 380–440 V 3~, 50/60 Hz. Model SK 3187.937 can only be used in 3-phase operation. Software use subject to Rittal license conditions.