SK 3486937 Wall-mounted Blue e+ Dynamic cooling unit 2.0 kW

Giá bán: Liên hệ

SK Blue e+ cooling unit, wall-mounted, 2.0 kW, 110–240 V, 1~, 380–480 V, 3~, 50–60 Hz, carbon steel, W x H x D: 450 x 1600 x 294 mm

Tình trạng: Còn hàng

Bảo hành:

Địa chỉ

109 Đường N2, Khu dân cư Khang Điền, P. Long Trường, TP HCM, VN

HOTLINE

0917082400

Đặt mua ngay

Thông tin chi tiết
Thông tin bổ sung

CATEGORY	DETAILS
Total cooling output to DIN EN 14511	L35/L35: 2 kW (50/60 Hz) • L35/L50: 1.29 kW (50/60 Hz)
Cooling output (BTU/h)	L35/L35: 6,824 BTU/h (50/60 Hz) • L35/L50: 4,402 BTU/h (50/60 Hz)
Rated operating voltage	110–240 V, 1~, 50/60 Hz • 380–480 V, 3~, 50/60 Hz
Rated output	0.73 kW
Air throughput	External circuit: 1,250 m³/h • Internal circuit: 1,250 m³/h
Air throughput (CFM)	External circuit: 735.7 cfm • Internal circuit: 735.7 cfm
Energy efficiency ratio	EER (L35/L35): 3.23 (50/60 Hz)
Seasonal energy efficiency ratio	SEER: 7.6
Dimensions	450 × 1,600 × 294 mm
Dimensions (inch)	17.7 × 63 × 11.6 ˝
Required mounting cut-out	Width: 433 mm • Height: 1,579 mm
Mounting cut-out (inch)	Width: 17 ˝ • Height: 62.2 ˝
Protection category	Internal circuit: IP55
Refrigerant	R-1234yf / 1.1 kg
Refrigerant distribution	Compression system: 0.65 kg • Heat pipe system: 0.45 kg
Global warming potential	GWP: 0.5 • CO₂e: 0 t
Refrigerant (lb.)	Quantity: 2.4 lb
Temperature control	e+ controller (factory setting +35 °C)
Operating temp range	-20 °C to +60 °C
Operating temp range (°F)	-4 °F to +140 °F
Storage temp range	-40 °C to +70 °C
Storage temp range (°F)	-40 °F to +158 °F
Refrigerant circuit range	3 °C to 60 °C
Heat pipe range	-20 °C to 45 °C
Setting range	20 °C to 50 °C
Setting range (°F)	68 °F to 122 °F
Rated power consumption	L35/L35: 0.62 kW (50/60 Hz) • L35/L50: 0.6 kW (50/60 Hz)
Permissible operating pressure	Max. 24 bar (348.1 PSI)
Packaging unit	1 pc
Weight	Net: 70 kg • Gross: 72.5 kg
Material	Carbon steel
Construction note	Partial installation not possible
Special notes	To comply with EMC requirements according to DNV-CG-0339, additional coil SK 3124.010 must be installed on each phase of the power supply. Coil operation supported only for 220–240 V, 1~ and 380–440 V, 3~, 50/60 Hz. Model SK 3187.937 supports only 3-phase operation. Software use subject to Rittal license conditions.